Resources · Video tutorials

Thermodynamics in Aspen Plus

Connect thermodynamic principles with process simulation. These video tutorials complement ChETL’s theory and worked calculations, showing how models, assumptions and property data are applied in Aspen Plus.

How to use this page

Each topic runs in three steps: the textbook concept, the transparent calculation in ChETL, and its application in Aspen Plus. Choose a chapter to play it on this page, starting at the selected time, or use the YouTube link to open it there. The videos are from Aspen School.

Related concepts do not guarantee identical models, assumptions or numbers. A ChETL result and an Aspen Plus result agree only when the components, property model, parameters, conditions and reference states agree. Compare those first.

Models and property data

Activity-coefficient models and binary interaction parameters

Thermodynamic concept
Non-ideal liquid mixtures are described through the excess Gibbs energy, whose models contain binary interaction parameters fitted to data.
In ChETL
Read the activity models (including NRTL) and where parameters come from, then see them used in the ethanol–water P–xy example.
In Aspen Plus
Property methods select the thermodynamic models used by a simulation; the NRTL and binary-parameter chapters show how an activity-coefficient model and its parameters are chosen and inspected.
What to compare
The form of the model, the parameter values and their source, and the units and temperature basis. Aspen Plus and ChETL may use different parameter sets, so compare these before comparing activity coefficients.

Pure-component and binary property data

Thermodynamic concept
Calculated results are only as good as the pure-component properties and binary data behind them; saturation properties and mixture behaviour can be examined directly.
In Aspen Plus
Property analysis tools examine pure-component properties and binary mixtures, and the chapters show retrieval of binary data from NIST.
What to compare
Property values and diagrams for the same substance or pair at the same conditions. Differences can come from the data source, correlation or model, not only from errors.

Phase and chemical equilibrium

Vapour–liquid equilibrium and TP flash

Thermodynamic concept
At a given temperature, pressure and overall composition, equilibrium fixes whether a mixture is liquid, vapour or both, and the amount and composition of each phase.
In ChETL
Follow the TP flash and bubble and dew calculations; the P–xy worked example is a complete bubble-point calculation.
In Aspen Plus
The Flash2 block performs a two-phase flash of a stream. The Decanter part of this section addresses liquid–liquid separation, which is outside ChETL’s vapour–liquid scope.
What to compare
Vapour fraction and phase compositions for the same components, temperature, pressure, feed and property model. Equal results need equal models and parameters.

Chemical equilibrium

Thermodynamic concept
At specified temperature and pressure, the equilibrium composition satisfies the equilibrium relations (equivalently, minimum Gibbs energy) together with the material or element balances.
In ChETL
Work through single-reaction and multiple-reaction equilibrium. ChETL’s scope is homogeneous gas-phase reactions treated as ideal-gas mixtures.
In Aspen Plus
REquil is set up from specified reactions; RGibbs finds the equilibrium composition by Gibbs-energy minimisation.
What to compare
Equilibrium conversion or composition at the same temperature and pressure. Match the feed composition and basis, the permitted species and reactions, the phase assumptions, the property model and the thermochemical reference data; differences usually trace to one of these, including non-ideality that ChETL does not treat.

Energy balances and flow processes

Pumps, compressors and expanders

Thermodynamic concept
A steady-flow device changes a stream’s enthalpy; its work is compared with the isentropic work between the same inlet state and outlet pressure through an efficiency.
In ChETL
See steady-flow devices and the module scope: adiabatic, single-stream devices handling a pure fluid. Multistage machines are not offered in ChETL.
In Aspen Plus
The pump chapter and the compressor and gas-turbine chapter show how outlet conditions and power are obtained from a specified pressure change and efficiency.
What to compare
Outlet temperature, enthalpy change and shaft work for a single-stage device with the same fluid, inlet state, outlet pressure and efficiency definition. Check which efficiency basis each tool uses.

Heating and cooling duty

Thermodynamic concept
With negligible shaft work and changes in kinetic and potential energy, the heat transferred equals the stream’s enthalpy change: per unit mass, and as a duty for a mass flow.

q = hout − hin   Q̇ = ṁ(hout − hin)

In ChETL
The steady-flow energy balance is explained in the guide. Heated or cooled devices are not calculated in ChETL, so use the guide’s balance and the pure-component enthalpy topics as the hand-calculation route.
In Aspen Plus
The heater and cooler chapter shows a stream heated or cooled to a specified condition and the resulting duty.
What to compare
The hand duty against the simulated duty for the same stream, pressure and end state. Use the same mass flow and the same enthalpy basis (reference state and property model); enthalpies on different bases cannot be compared directly, though their differences can.

More Aspen Plus training

For broader Aspen Plus training, including setup, flowsheeting, equipment design and distillation, see the Aspen School channel on YouTube.

Launch ChETL